[FrankJScott]

[center][/center]

[center][size=large]DISCOVER THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
It's only when purchasers need standing feet that they notice them, and the difference is immense. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. If you comprehend the difference before you order, you've stayed away from an annoying purchase in one of the simplest ways there is.

Bolts or No Bolts
There's a simple basic difference. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

What Non-Standing Feet Can't Do
For photography and display, standing feet are necessary. Unaided standing means full-length poses without evident supports, and display in a corner, a doorway, or anywhere else that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for exactly that reason.

Showering and Standing Feet
In the shower, too, standing feet are essential. A shower with your doll only works if she can stand, as lying her down in one is both impractical and risky. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Weeks or Months Before the Damage Shows
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes visible, and it's essentially unfixable once it starts. The water will find its way in regardless of your precautions, so a doll with non-standing feet should never be in the shower, no matter how attentive you are.

When You Lack Room for a Hanging Setup
Easier storage is another thing standing feet offer in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. This works as a space-efficient alternative when there's no room for a hanging setup, and it's a solid choice if you want to display the doll rather than keep her hidden. The standing feet make it possible to store the doll in a way that's evident and accessible, which some purchasers prefer.

Weight and Price Trade-Offs
It's a downside that standing feet are marginally more pricey and a little heavier. Price-wise, a doll with standing feet is generally a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. Small as the difference is, and generally worth the extra cost, it's worth knowing about if you're purchasing on an extremely tight budget.

Distracting in Photos
The other disadvantage is that the bolts can become visible if the feet are bare. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some buyers find distracting. Cover the feet with closed shoes or pick footwear that hides the bolts and this small aesthetic issue is solved, so it's not a reason to avoid standing feet entirely.

A Completely Valid Choice
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly enough when the doll will chiefly be in a bed or on a sofa. This choice is completely valid for buyers who know what they want.

Not Enough to Decide on Its Own
Non-standing feet are somewhat softer and more pliable too, and some customers find that more comfortable to touch. On its own this subtle difference doesn't normally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

A Common and Costly Mistake
The big risk? Buyers forget what kind of feet they have and attempt to stand the doll in any case. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this usual mistake causes real damage. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. When you buy non-standing feet, remember what they are and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
One more question: can a doll that doesn't have standing feet be fitted with them afterwards? Briefly: no, and definitely not easily. Because the bolts are embedded in the soles during manufacturing, adding them later means cutting into the feet and installing new hardware, a costly process that often doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Purchase a doll with standing feet in the first place; it's better than trying to add them later.

Opting for Between Standing and Non-Standing Feet
The functional advice for buyers choosing between standing and non-standing feet is simple. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. Non-standing feet are perfectly acceptable if you only want to use her in bed or on a sofa and you don't care about display. If you're on the fence, go with standing feet, the safer alternative, because nothing is ruled out and the small extra cost is worth paying.

Room for Storage Is a Real Concern
Gender plays a part too, and it's worth mentioning. Standing feet upside male dolls more than female dolls in general, as they're heavier and harder to store any other way. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and needs more space. Storing upright becomes possible for male dolls with standing feet, a genuine benefit if you don't have a lot of room.

A Trade-Off That Matters for Barefoot Photos
To finish, the aesthetic difference between standing and non-standing feet is worth noting. A little harder at the bottom is how standing feet are, because of the bolts, and it can be evident when the doll is barefoot. Less aesthetically pleasing, to some purchasers, is this, especially on dolls with fragile features, as the hard soles look a little industrial. Some customers prefer non-standing feet, which are softer and more natural-looking. This is a trade-off that only matters if you're photographing the doll barefoot, and it's worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
A maintenance angle is also worth considering. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out entirely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the appropriate tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them slightly lower-maintenance in the long run.

Carpet Grips Well
How well the doll stands on distinct surfaces depends in part on the bolts. Constant on carpet, the doll benefits from bolts that grip well. Bolts can slip on hard flooring, notably a smooth floor, so the doll may need extra support to stay upright. On a hard surface, consider using a small mat or a grippy pad under the feet to prevent sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.

The Final Consideration
There's one more consideration that's often overlooked: standing feet influence the doll's overall proportions. Adding a small amount of length to the foot, the bolts can a little change the way the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about exact proportions. Lacking the bolts, non-standing feet avoid this effect and are marginally shorter and more natural-looking.

Pick Standing Unless You're Certain
Bottom line: for most customers standing feet are worth the additional cost, opening up posing, display, storage and shower alternatives that non-standing feet don't. The exception is the customer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out click here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]