[FrankJScott]

[center][/center]

[center][size=large]VIEW THE BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
You won't think about standing feet until you need them, and then you'll find the difference is vast. Small detail on the spec sheet, large consequences: what the doll can do, how she stores, how she photographs and how she wears over time all change. Comprehend the difference before ordering and you'll have avoided an irritating purchase in one of the simplest ways possible.

Why Non-Standing Dolls Can Only Sit or Lie Down
The basic difference is simple. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. The key is the bolts, and everything else follows from whether they're there.

What Non-Standing Feet Can't Do
Standing feet are a must for photography and display. If a doll can stand unaided, full-length poses without apparent supports are possible, as is display in a corner, a doorway or anywhere else that requires her to be upright. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.

If You Want to Shower With Your Doll
Standing feet are also crucial for shower use. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and dangerous. In a wet environment the standing feet give her stability, while the metal bolts make sure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. The ankle of a non-standing foot includes foam or filler material, which absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become noticeable but is fundamentally unfixable once it starts. The water will find its way in irrespective of your precautions, so a doll with non-standing feet should never be in the shower, no matter how careful you are.

Evident and Accessible Storage
Some setups make standing feet easier to store as well. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. Customers who don't have room for a hanging setup will find this a space-efficient option, and it suits buyers who want to display the doll rather than keep her hidden. Standing feet make apparent and accessible storage possible, which suits some customers best.

A More Involved Manufacturing Process
It's a disadvantage that standing feet are slightly more expensive and somewhat heavier. A few percent extra on the price is typical compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. Typically worth the additional cost, and small, the difference is still worth knowing about on an incredibly tight budget.

High Heels and Open-Toed Footwear
Bare feet can make the bolts noticeable, which is the other drawback. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be visible in photos, which some customers find distracting. Cover the feet with closed shoes or pick footwear that hides the bolts and this slight aesthetic issue is solved, so it's not a reason to stay away from standing feet entirely.

Savings for Articulated Hands or a Better Wig
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly adequate, and the savings can go on upgrades such as articulated hands or a better wig. If you know what you want, this is an entirely valid choice.

Not Enough to Decide on Its Own
Also, non-standing feet are slightly softer and more elastic, something some purchasers find more comfortable to touch. The difference is subtle and not usually enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Tearing and Collapse
The huge risk with non-standing feet is that purchasers forget what kind of feet they have and attempt to stand the doll in any case. Expect real damage from this typical oversight, because the foam inside the ankle can't support the doll's weight and will tear or collapse. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're buying them.

Why Retrofitting Doesn't Work Well
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not easily. Adding the bolts afterwards needs cutting into the feet and installing new hardware, which is pricey and regularly doesn't work as well as the original, because they're embedded in the soles during manufacturing. Considering a doll without standing feet, and think you might want them later? Purchase a doll with standing feet in the first place; it's better than attempting to add them later.

The Safer Option
Opting for between standing and non-standing feet? The useful advice is straightforward. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Perfectly sufficient are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. If you're on the fence, go with standing feet, the safer alternative, because nothing is ruled out and the small additional cost is worth paying.

Heavier Dolls Are Harder to Store
There's also a gender consideration worth mentioning. Because male dolls are heavier and more difficult to store in any other way, they broadly get more from standing feet than female dolls do. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and requires more space. For buyers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a genuine upside.

Industrial-Looking Soles on Delicate Dolls
The aesthetic difference between standing and non-standing feet is worth a final note. Standing feet have a slightly harder bottom because of the bolts, and this can be noticeable with the doll barefoot. The look of the hard soles is somewhat industrial, and some customers find that less aesthetically gratifying, particularly on dolls with fragile features. Some customers prefer the softer, more natural look of non-standing feet. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
It's worth considering the maintenance angle as well. Standing feet aren't a fit-and-forget feature; check the bolts periodically, as a loose bolt can damage the foot or the ankle and a bolt that drops out completely can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the appropriate tool to tighten them. With no hardware to come loose, non-standing feet steer clear of this issue and are a little lower-maintenance in the long run.

How the Bolts Behave on Different Surfaces
Standing on distinct surfaces is also influenced by the bolts. The bolts grip well on carpet, so the doll is stable. If the floor is hard, and especially silky, the bolts can slip and the doll may need additional support to stay upright. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it stops sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

An Overlooked Detail: Proportions
Regularly overlooked, there's a final consideration in how standing feet affect the doll's overall proportions. The foot gets a small amount of extra length from the bolts, and that can a little change the way the doll looks in barefoot photos. Subtle as the effect is, and normally invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are slightly shorter and more natural-looking.

Choose Standing Unless You're Certain
The bottom line is that most buyers get their money's worth from standing feet, because they open up posing, display, storage and shower choices that non-standing feet don't. Skipping them is for customers certain that bed use is all the doll will get, with no standing display or photography. For the rest of customers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this A No-BS Deep Dive Into Sex Dolls- The Honest Breakdown 4d6c0b3 not forgetting sites such as The Ultimate Guide to Sex Dolls- Start Here and The Definitive Primer on Sex Dolls Today- No Hype Just Facts. Also check out find more information for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]