[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Standing feet go unconsidered until they're needed, at which point buyers discover the difference is immense. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Understand the difference before ordering and you'll have evaded an irritating purchase in one of the simplest ways possible.

What Makes a Foot a Standing Foot
Uncomplicated is the basic difference. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

Corners, Doorways and Anywhere Upright
You need standing feet for photography and display. Standing unaided, she can be photographed in full-length poses without apparent supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the main reason most photographers specify standing feet when ordering.

Why Showers Demand Standing Feet
In the shower, too, standing feet are necessary. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. The metal bolts ensure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.

The Source of a Lot of Damaged Dolls
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Fundamentally unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. Showers and non-standing feet don't mix, no matter how diligent you are, as the water will find its way in anyway of your precautions.

Standing Storage Explained
Standing feet can make storage easier as well, depending on the setup. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a great one. Some purchasers prefer the evident, accessible storage that the standing feet make possible.

Small Difference, Usually Worth It
Somewhat more expensive and a little heavier: that's the drawback of standing feet. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price normally a few percent above a doll with non-standing feet. The difference is small, usually worth the extra cost, and worth knowing about if you're buying on a really tight budget.

Bolts in Photos
The second downside is that bare feet can show the bolts. Some purchasers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. This trivial aesthetic issue is readily solved by covering the feet with closed shoes or by selecting footwear that hides the bolts; it's no reason to stay away from standing feet totally.

Fine for Bed-Only Dolls
Fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will chiefly be in a bed or on a sofa. Totally valid is this choice for customers who know what they want.

No Hard Core Inside
Non-standing feet are slightly softer and more flexible, and some purchasers find them more comfortable to touch as a result. A subtle difference, not generally enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Attempting to Stand the Doll Anyway
Forgetting what kind of feet they have, customers attempt to stand the doll in any case, and that's the big risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a usual oversight. Because the feet have been permanently damaged, the result is a doll that can no longer stand even if you attempt to support her. Keep in mind that non-standing feet are non-standing, if that's what you're purchasing, and don't be tempted to test their limits.

Adding Bolts Afterwards
A further question is whether a doll that doesn't have standing feet can have them retrofitted. No, not easily, is the short answer. Costly, and regularly not as good as the original, is the process of adding the bolts subsequently by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. You might want them later if you're considering purchasing a doll without standing feet; in that case, it's better to buy a doll with standing feet in the first place than to try to add them later.

Which Feet Should You Order?
Purchasers selecting between standing and non-standing feet can follow some simple useful advice. If any of photographing the doll, displaying her standing, or employing her in the shower is on the cards, you need standing feet. Perfectly acceptable are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

Upright Storage for Male Dolls
Gender plays a part too, and it's worth mentioning. Male dolls broadly upside from standing feet more than female dolls, because they're heavier and more hard to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Storing upright becomes possible for male dolls with standing feet, a genuine benefit if you don't have a lot of room.

What Barefoot Photos Reveal
A final note is worth making on the aesthetic difference between standing and non-standing feet. Standing feet are somewhat harder at the bottom, because of the bolts, and this can be apparent when the doll is barefoot. The look of the hard soles is somewhat industrial, and some buyers find that less aesthetically satisfying, particularly on dolls with fragile features. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Maintenance: Check the Bolts Periodically
A maintenance angle deserves consideration too. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Check every few months, by gently twisting the bolts, and tighten with the suitable tool whichever feel loose. No hardware means nothing to come loose, so non-standing feet don't have this issue and are somewhat lower-maintenance in the long run.

A Small Mat or Grippy Pad
Standing on different surfaces is also influenced by the bolts. Stable on carpet, the doll benefits from bolts that grip well. Hard flooring can make the bolts slip, especially if the floor is silky, so the doll may need additional support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it stops sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

An Overlooked Detail: Proportions
One final consideration, regularly overlooked, is how standing feet influence the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can a little change the way the doll looks in barefoot photos. The effect is subtle and ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. With non-standing feet there are no bolts, so no such effect, and the feet are slightly shorter and more natural-looking.

Extra Cost for Extra Options
At the end of the day, standing feet are worth the extra cost for most buyers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this Your Ultimate Guide to Modern Sex Dolls- What You Need to Know ddec384 not to mention The No-Nonsense Guide to Modern Sex Dolls- Read Before You Buy and The Ultimate Breakdown of Sex Dolls- Before You Spend a Penny. Also check out visit this site right here together with basics and site link for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]