[FrankJScott]

[center][/center]

[center][size=large]SEE BEST SEX DOLL FEET GUIDE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is vast. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Get to grips with the difference before you order and you've taken one of the simplest steps towards steering clear of an irritating purchase.

Metal Bolts Embedded in the Soles
It's an uncomplicated difference at heart. Standing feet come with metal bolts embedded in the soles, and these permit the doll to stand upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and attempting to stand her will damage the feet. The key is the bolts, and everything else follows from whether they're there.

What Non-Standing Feet Can't Do
Standing feet are necessary for photography and display. Full-length poses without apparent supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the chief reason most photographers specify standing feet when ordering.

Standing Feet Are Also Essential for Showers
Also important is standing feet for shower use. It's impractical and risky to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. A genuine safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
Shower use deserves more detail, being the source of a lot of damaged dolls. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. Water rusting the metal skeleton inside the leg takes weeks or months to become apparent, yet once it starts it's essentially unfixable. A doll with non-standing feet should never be in the shower, no matter how attentive you are, because the water will find its way in anyway of your precautions.

Visible and Accessible Storage
Another benefit of standing feet is easier storage in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. It's a space-efficient alternative for purchasers without room for a hanging setup, and a decent one for customers who'd rather display the doll than keep her hidden. The doll can be stored in a way that's noticeable and accessible thanks to the standing feet, and some customers prefer this.

Small Difference, Usually Worth It
On the downside, standing feet are somewhat more pricey and slightly heavier. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small quantity of weight and the manufacturing process is more involved. Small as the difference is, and generally worth the additional cost, it's worth knowing about if you're acquiring on an incredibly tight budget.

Solving the Visible Bolt Problem
There's another downside: the bolts can become visible if the feet are bare. High-heeled shoes or open-toed footwear on a doll can leave the bolts evident in photos, which some customers find distracting. Cover the feet with closed shoes or select footwear that hides the bolts and this small aesthetic issue is solved, so it's not a reason to avoid standing feet totally.

Know What You Want
Purchasers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly adequate when the doll will mostly be in a bed or on a sofa. Entirely valid is this choice for purchasers who know what they want.

Softness as a Selling Point
Comfort to the touch is another point: non-standing feet are slightly softer and more adaptable, which some buyers prefer. Not ordinarily enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Forgetting What Kind of Feet She Has
Customers at times forget what kind of feet they have and attempt to stand the doll anyway, which is the huge risk with non-standing feet. Genuine damage comes of this typical oversight, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.

Decide Before You Order
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not easily, no. Because the bolts are embedded in the soles during manufacturing, adding them after that means cutting into the feet and installing new hardware, an expensive process that often doesn't work as well as the original. Attempting to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, purchase them first.

A Simple Decision Guide
The sensible advice for customers choosing between standing and non-standing feet is direct. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly adequate. Not sure? Choose standing feet: nothing is off the table with them, and the small additional cost is worth paying.

Why Male Dolls Need Standing Feet More
There's also a gender consideration worth mentioning. Because they're heavier and more tough to store in any other way, male dolls broadly benefit from standing feet more than female dolls. Storage lying down, which puts pressure on the body and needs more space, is the only alternative for a 45kg male doll that can't stand. Male dolls can store upright with standing feet, which is a genuine benefit for customers who don't have a lot of room.

Industrial-Looking Soles on Delicate Dolls
There's a final note to make on the aesthetic difference between standing and non-standing feet. Slightly harder at the bottom is how standing feet are, because of the bolts, and it can be noticeable when the doll is barefoot. Particularly on dolls with fragile features, some buyers find the marginally industrial look of the hard soles less aesthetically gratifying. Some purchasers prefer non-standing feet, which are softer and more natural-looking. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Tighten With the Appropriate Tool
There's also a maintenance angle that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out totally can cause the doll to collapse. Check every few months, by gently twisting the bolts, and tighten with the suitable tool whichever feel loose. No hardware means nothing to come loose, so non-standing feet don't have this issue and are a little lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
On distinct surfaces, the bolts influence how the doll stands. Carpet suits the bolts, which grip well, leaving the doll constant. The doll may need additional support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it avoids sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

The Final Consideration
A final, regularly overlooked, consideration is the effect of standing feet on the doll's overall proportions. Because the bolts add a small quantity of length to the foot, the doll can look a little different in barefoot photos. The effect is subtle and normally invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

One of the Simplest Upgrades to Justify
The bottom line is that standing feet are worth the extra cost for most purchasers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this The Only Overview of Sex Dolls Right Now- Read Before You Buy 0ce284e together with A Quick Lowdown on Modern Sex Dolls- What Actually Matters and An Honest Primer on Sex Dolls- What Actually Matters. Also check out find more which is worth considering with pop over to this site together with anchor on top of helpful hints which is worth considering with see this page on top of find on top of this content bearing in mind more information which is worth considering with see page and view it now for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]