[FrankJScott]

[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET ADVICE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
You won't think about standing feet until you need them, and then you'll find the difference is vast. Small detail on the spec sheet, huge outcomes: what the doll can do, how she stores, how she photographs and how she wears over time all change. To stay away from a frustrating purchase, understand the difference before you order; it's one of the simplest ways.

Everything Follows From the Bolts
Simple is the basic difference. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and trying to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Corners, Doorways and Anywhere Upright
Photography and display both need standing feet. Full-length poses without evident supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the main reason most photographers specify standing feet when ordering.

Why Showers Demand Standing Feet
Also critical is standing feet for shower use. Lying her down in a shower is impractical and unsafe, so showering with your doll means she needs to stand. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. A genuine safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is essentially unfixable, though it takes weeks or months to become noticeable. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in irrespective of your precautions, no matter how attentive you are.

Space-Efficient Storage
Easier storage is another thing standing feet offer in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. A solid alternative for customers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Standing feet permit storage that's visible and accessible, something some buyers prefer.

Metal Bolts Add Weight
The cost you pay for standing feet is that they're slightly more pricey and somewhat heavier. A few percent extra on the cost is normal compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. Though the difference is small and it's generally worth the extra cost, knowing about it matters if you're buying on a very tight budget.

Bolts Showing When the Feet Are Bare
The bolts can show if the feet are bare, which is the other downside. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some purchasers find distracting. Closed shoes or footwear that conceals the bolts solve this small aesthetic issue, so it's not a reason to steer clear of standing feet entirely.

The Case for Non-Standing Feet
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. Totally valid is this choice for purchasers who know what they want.

Not Enough to Decide on Its Own
Marginally softer and more flexible, non-standing feet are more comfortable to touch for some purchasers. A subtle difference, not ordinarily enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

A Doll That Can No Longer Stand
The big risk? Purchasers forget what kind of feet they have and try to stand the doll anyway. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this widespread error causes genuine damage. The feet have been permanently damaged, so the doll can no longer stand even if you attempt to support her. If you're purchasing non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Buy Standing Feet in the First Place
And what about retrofitting standing feet to a doll that doesn't have them? The short answer is no, not easily. During manufacturing the bolts are embedded in the soles; doing it later means cutting into the feet and installing new hardware, which is costly and frequently doesn't work as well as the original. If you're considering buying a doll without standing feet, and you think you might want them later, it's better to acquire a doll with standing feet in the first place than to attempt to add them later.

A Simple Decision Guide
Buyers choosing between standing and non-standing feet can follow some uncomplicated functional advice. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Perfectly enough are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. For the unsure, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small extra cost.

Pressure on the Body When Lying Down
A gender consideration is also worth mentioning. Because male dolls are heavier and more tough to store in any other way, they usually get more from standing feet than female dolls do. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. The ability to store upright is given to male dolls by standing feet, and that's a genuine advantage for purchasers who don't have a lot of room.

Apparent Hardness at the Bottom
Worth a final note is the aesthetic difference between standing and non-standing feet. The bottom of standing feet is somewhat harder because of the bolts, something that can be noticeable when the doll is barefoot. Some buyers don't find this aesthetically satisfying, especially on dolls with delicate features, since the hard soles look marginally industrial. Some buyers prefer the softer, more natural look of non-standing feet. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

A Quick Routine Check
Maintenance is another angle that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Marginally lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

Grip and Stability
The bolts influence how the doll stands on different surfaces as well. With carpet, the bolts grip well and the doll is constant. The doll may need additional support to stay upright when the bolts slip on hard flooring, especially a silky floor. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it stops sliding. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

An Overlooked Detail: Proportions
How standing feet influence the doll's overall proportions is a final consideration that's regularly overlooked. The bolts add a small amount of length to the foot, which can somewhat change the way the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Without the bolts, non-standing feet don't have this effect, and the feet are somewhat shorter and more natural-looking.

One of the Simplest Upgrades to Justify
At the end of the day, standing feet are worth the extra cost for most buyers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. Skipping them is for purchasers certain that bed use is all the doll will get, with no standing display or photography. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this rosslink. Also check out read more not to mention browse around this site and helpful site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]