[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Standing feet go unconsidered until they're needed, at which point customers discover the difference is huge. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Understand the difference before ordering and you'll have avoided an annoying purchase in one of the simplest ways possible.

Standing Upright Without Support
Boiled down, the difference is uncomplicated. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. Present or absent, the bolts are the key, and everything else follows.

Display Possibilities With Standing Feet
Standing feet are critical for photography and display. Full-length poses without noticeable supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Lying Her Down in a Shower Is Impractical and Dangerous
Showering is another case where standing feet are essential. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and risky. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. Real safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Why Shower Use Destroys So Many Dolls
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become apparent and being basically unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how careful you are.

No Hanging Hook or Storage Case Needed
In some setups, standing feet also make storage easier. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Standing feet permit storage that's evident and accessible, something some purchasers prefer.

Metal Bolts Add Weight
Standing feet are somewhat more expensive and somewhat heavier, which is their downside. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. It's worth knowing about if you're acquiring on an incredibly tight budget, though the difference is small and typically worth the additional cost.

Solving the Visible Bolt Problem
There's another drawback: the bolts can become apparent if the feet are bare. High-heeled shoes or open-toed footwear on a doll can leave the bolts apparent in photos, which some buyers find distracting. You can solve this small aesthetic issue by covering the feet with closed shoes or picking footwear that hides the bolts, so don't stay away from standing feet totally because of it.

A Completely Valid Choice
Customers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. For a doll that's going to spend most of her life in a bed or on a sofa, non-standing feet are perfectly adequate, and the savings can go towards other upgrades like articulated hands or a better wig. For buyers who know what they want, this is a totally valid choice.

No Hard Core Inside
Marginally softer and more elastic, non-standing feet are more comfortable to touch for some customers. Subtle as it is, and not generally enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel more like the rest of the doll and less like they have a hard core inside them.

Forgetting What Kind of Feet She Has
Trying to stand the doll in any case, after forgetting what kind of feet they have, is the huge risk buyers run with non-standing feet. Why is this widespread mistake so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. Even if you attempt to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Don't be tempted to test their limits if you're buying non-standing feet; remember that they're non-standing.

The Short Answer Is No
And what about retrofitting standing feet to a doll that doesn't have them? No, not readily, is the short answer. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is costly and often doesn't work as well as the original. Trying to add standing feet later is worse than buying a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, acquire them first.

If You're Not Sure, Choose Standing
There's direct practical advice for customers opting for between standing and non-standing feet. Photographing the doll, displaying her standing, or utilising her in the shower? Then you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly sufficient. Undecided buyers are safer with standing feet, which restrict nothing and justify their small extra cost.

Heavier Dolls Are Harder to Store
We should mention a gender consideration as well. More than female dolls, male dolls ordinarily upside from standing feet, being heavier and more hard to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. With standing feet, male dolls can be stored upright, a genuine benefit for buyers who don't have a lot of room.

What Barefoot Photos Reveal
A final note is worth making on the aesthetic difference between standing and non-standing feet. The bolts make standing feet slightly harder at the bottom, and this can be evident when the doll is barefoot. The look of the hard soles is somewhat industrial, and some customers find that less aesthetically pleasing, particularly on dolls with delicate features. More natural-looking and softer are non-standing feet, which some buyers prefer. This is a trade-off that only matters if you're photographing the doll barefoot, and it's worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
A maintenance angle is also worth considering. Standing feet aren't a fit-and-forget feature; check the bolts periodically, as a loose bolt can damage the foot or the ankle and a bolt that drops out completely can cause the doll to collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the suitable tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them a little lower-maintenance long term.

Grip and Stability
Distinct surfaces change how the doll stands, thanks to the bolts. The doll is stable on carpet, where the bolts grip well. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

The Final Consideration
There's one more consideration that's frequently overlooked: standing feet impact the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can a little change the way the doll looks in barefoot photos. Generally invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are slightly shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
Standing feet are worth the additional cost for most buyers, which is the bottom line, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out learn this here now which is worth considering with like this and go to this web-site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]