[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
It's only when customers need standing feet that they notice them, and the difference is immense. On the spec sheet it looks small, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an annoying purchase.

Metal Bolts Embedded in the Soles
The basic difference is uncomplicated. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. No bolts in non-standing feet means the doll can only sit or lie down, and attempting to stand her will damage the feet. The bolts are the key, and everything else follows from whether they're present or not.

Display Possibilities With Standing Feet
Standing feet are critical for photography and display. If a doll can stand unaided, full-length poses without visible supports are possible, as is display in a corner, a doorway or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the main reason most photographers specify standing feet when ordering.

Metal Bolts Keep Water Out of the Feet
In the shower, too, standing feet are essential. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and hazardous. The standing feet give her stability in a wet environment, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.

Water Will Find Its Way In
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is fundamentally unfixable once it starts. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how careful you are.

Space-Efficient Storage
Some setups make standing feet easier to store as well. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient option, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some buyers prefer that.

Metal Bolts Add Weight
It's a drawback that standing feet are somewhat more expensive and slightly heavier. Expect the cost to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small quantity of weight and the manufacturing process is more involved. The difference is small, and it's ordinarily worth the additional cost, but it's worth knowing about if you're purchasing on an extremely tight budget.

Bolts in Photos
The bolts can become noticeable if the feet are bare, and that's the other disadvantage. Some customers find it distracting that the bolts might be noticeable in photos on a doll with high-heeled shoes or open-toed footwear. Because this trivial aesthetic issue can be solved by covering the feet with closed shoes or choosing footwear that hides the bolts, it's not a reason to avoid standing feet totally.

Putting the Savings Elsewhere
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. A doll that lives chiefly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Where buyers know what they want, this is an entirely valid choice.

Maximum Softness
Some purchasers find non-standing feet more comfortable to touch, being somewhat softer and more pliable. A subtle difference, not ordinarily enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Buyers occasionally forget what kind of feet they have and try to stand the doll in any case, which is the sizable risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a typical oversight. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. If non-standing feet are what you're buying, remember that they're non-standing and don't test their limits.

Cutting Into the Feet Is Expensive and Risky
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The short answer is that it can't readily be done. Cutting into the feet and installing new hardware is what adding the bolts after that requires, which is costly and regularly doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. You might want them later if you're considering purchasing a doll without standing feet; in that case, it's better to acquire a doll with standing feet in the first place than to attempt to add them later.

Worth the Small Extra Cost
Selecting between standing and non-standing feet? The practical advice is straightforward. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

A 45kg Male Doll That Can't Stand
There's also a gender consideration worth mentioning. Normally, standing feet benefit male dolls more than female dolls, because male dolls are heavier and more hard to store in any other way. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. Storing upright becomes possible for male dolls with standing feet, a real upside if you don't have a lot of room.

Weighing Looks Against Function
There's a final note to make on the aesthetic difference between standing and non-standing feet. When the doll is barefoot, the slight hardness at the bottom of standing feet, caused by the bolts, can be evident. Some buyers don't find this aesthetically satisfying, especially on dolls with fragile features, since the hard soles look a little industrial. Non-standing feet are softer and more natural-looking, which some purchasers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
Maintenance is another angle that's worth considering. Standing feet aren't a fit-and-forget feature; check the bolts periodically, as a loose bolt can damage the foot or the ankle and a bolt that drops out entirely can cause the doll to collapse. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're somewhat lower-maintenance in the long run.

Carpet Grips Well
How the doll stands on distinct surfaces is also affected by the bolts. On carpet, the bolts grip well and the doll is constant. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is smooth. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it prevents sliding. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

The Final Consideration
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. Barefoot photos can look slightly different because the bolts add a small quantity of length to the foot. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are a little shorter and more natural-looking.

What Standing Feet Open Up
Options for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the extra cost for most customers. Skipping them is for buyers certain that bed use is all the doll will get, with no standing display or photography. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this A No-BS Word on Sex Dolls Right Now- The Truth 284ed06 alongside all The Essential Lowdown on Sex Dolls- The Truth and An Honest Primer on Sex Dolls- What Actually Matters. Also check out this content and don't forget navigate to this website and visit homepage for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]