[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Until the moment they need them, buyers don't think about standing feet; then they find out the difference is gigantic. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To avoid a frustrating purchase, comprehend the difference before you order; it's one of the simplest ways.

Bolts or No Bolts
Boiled down, the difference is simple. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and trying to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Standing Unaided
You need standing feet for photography and display. Photographed in full-length poses without evident supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the main reason most photographers specify standing feet when ordering.

Lying Her Down in a Shower Is Impractical and Dangerous
Standing feet are necessary for the shower as well. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as hazardous. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. This is a genuine safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Weeks or Months Before the Damage Shows
Shower use deserves more detail, being the source of a lot of damaged dolls. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is essentially unfixable, though it takes weeks or months to become visible. Nevertheless cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.

Space-Efficient Storage
Standing feet can make storage easier as well, depending on the setup. No hanging hook or storage case is needed to store a doll with standing feet upright in a corner, a wardrobe, or a storage cabinet. Purchasers who want to display the doll rather than keep her hidden will find this a great alternative, and it's space-efficient if you don't have room for a hanging setup. Standing feet allow storage that's evident and accessible, something some purchasers prefer.

Weight and Price Trade-Offs
A little more costly and a little heavier: that's the downside of standing feet. Why the premium? The metal bolts add a small amount of weight to the doll, manufacturing is more involved, and the price normally ends up a few percent higher than a doll with non-standing feet. Usually worth the additional cost, and small, the difference is still worth knowing about on a really tight budget.

Solving the Visible Bolt Problem
Noticeable bolts are the other drawback, if the feet are bare. Distracting to some buyers is the possibility that the bolts are noticeable in photos on a doll with high-heeled shoes or open-toed footwear. You can solve this minor aesthetic issue by covering the feet with closed shoes or opting for footwear that conceals the bolts, so don't avoid standing feet totally because of it.

Fine for Bed-Only Dolls
Non-standing feet are cheaper and lighter, and they're fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. For a doll that's going to spend most of her life in a bed or on a sofa, non-standing feet are perfectly acceptable, and the savings can go towards other upgrades like articulated hands or a better wig. It's an entirely valid choice if you know what you want.

What Non-Standing Feet Feel Like
Non-standing feet are slightly softer and more elastic too, and some customers find that more comfortable to touch. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

A Doll That Can No Longer Stand
It's the forgetful buyer who trips up on non-standing feet, attempting to stand the doll anyway; that's the huge risk. Expect real damage from this widespread oversight, because the foam inside the ankle can't support the doll's weight and will tear or collapse. A doll that can no longer stand, even if you try to support her, is the result, because the feet have been permanently damaged. You're acquiring non-standing feet? Remember it, and don't be tempted to test their limits.

Can Standing Feet Be Retrofitted?
A further question is whether a doll that doesn't have standing feet can have them retrofitted. Not readily; that's the short answer. Cutting into the feet and installing new hardware is what adding the bolts after that requires, which is costly and frequently doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. Better than trying to add them later is purchasing a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.

Practical Advice by Use Case
Deciding between standing and non-standing feet comes with simple functional advice. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly sufficient. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small additional cost.

Heavier Dolls Are Harder to Store
Gender plays a part too, and it's worth mentioning. Broadly, standing feet benefit male dolls more than female dolls, because male dolls are heavier and more difficult to store in any other way. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. Buyers who don't have a lot of room get a real advantage from standing feet, which give male dolls the ability to store upright.

What Barefoot Photos Reveal
One final note: the aesthetic difference between standing and non-standing feet. Standing feet have a somewhat harder bottom because of the bolts, and this can be evident with the doll barefoot. Hard soles look marginally industrial, which some purchasers find less aesthetically pleasing, especially on dolls with fragile features. Softer and more natural-looking, non-standing feet are preferred by some buyers. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

Non-Standing Feet Are Lower-Maintenance
Consider the maintenance angle too. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. No hardware means nothing to come loose, so non-standing feet don't have this issue and are somewhat lower-maintenance in the long run.

Avoiding Sliding
Standing on distinct surfaces is also influenced by the bolts. On carpet, the bolts grip well and the doll is stable. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a smooth floor. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

If You Care About Exact Proportions
Ultimately, there's something that's frequently overlooked: how standing feet impact the doll's overall proportions. The way the doll looks in barefoot photos can slightly change, as the bolts add a small quantity of length to the foot. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about precise proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

Posing, Display, Storage and Shower Options
Standing feet are worth the extra cost for most purchasers, which is the bottom line, because they open up posing, display, storage and shower choices that non-standing feet don't. Certain the doll will only ever be used in bed, and never displayed or photographed standing? Then skip them. Nobody else should. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out more help not forgetting sites such as visit your url and his explanation for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]