[FrankJScott]

[center][/center]

[center][size=large]VIEW BEST SEX DOLL FEET GUIDE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is huge. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Understanding the difference before you order is one of the simplest ways to stay away from an annoying purchase.

The Bolts Are the Key
It's a simple difference at heart. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and trying to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

Why Photographers Specify Standing Feet
When it comes to photography and display, standing feet are critical. A doll who can stand unaided can be photographed in full-length poses without visible supports and displayed in a corner, a doorway, or wherever else she needs to be upright. The chief reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Lying Her Down in a Shower Is Impractical and Dangerous
Shower use makes standing feet necessary too. A shower with your doll only works if she can stand, as lying her down in one is both impractical and risky. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. Structural failure in the end, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

No Precaution Is Enough
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's fundamentally unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how attentive you are, because the water will find its way in anyway of your precautions.

Noticeable and Accessible Storage
Another benefit of standing feet is easier storage in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Space-efficient, this suits buyers who don't have room for a hanging setup, and it's solid for customers who want to display the doll rather than keep her hidden. Standing feet allow storage that's noticeable and accessible, something some buyers prefer.

Metal Bolts Add Weight
The downside of standing feet is that they're slightly more pricey and slightly heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a cost usually a few percent above a doll with non-standing feet. Small as the difference is, and ordinarily worth the extra cost, it's worth knowing about if you're purchasing on a very tight budget.

Distracting in Photos
The second drawback is that bare feet can show the bolts. The bolts might be visible in photos on a doll with high-heeled shoes or open-toed footwear, and some customers find that distracting. It's a slight aesthetic issue, solved by covering the feet with closed shoes or selecting footwear that conceals the bolts, and not a reason to avoid standing feet totally.

Know What You Want
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly enough for a doll who largely lives in a bed or on a sofa. It's a totally valid choice if you know what you want.

The Tactile Side of Non-Standing Feet
Some buyers find non-standing feet more comfortable to touch, being somewhat softer and more elastic. This is a subtle difference, and it's not usually enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

A Doll That Can No Longer Stand
Non-standing feet carry a large risk, which is purchasers forgetting what kind of feet they have and attempting to stand the doll anyway. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this widespread error causes genuine damage. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. If non-standing feet are what you're acquiring, remember that they're non-standing and don't test their limits.

Decide Before You Order
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The short answer is no, not easily. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is expensive and frequently doesn't work as well as the original. Thinking of purchasing a doll without standing feet, but might want them later? Better to acquire a doll with standing feet in the first place than to try to add them later.

Photography, Display or Shower: You Need Standing Feet
Customers choosing between standing and non-standing feet can follow some uncomplicated sensible advice. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Perfectly enough are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. For the doubtful, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Male Dolls Benefit More From Standing Feet
A gender consideration deserves a mention as well. Standing feet upside male dolls more than female dolls in general, as they're heavier and harder to store any other way. Storage lying down, which puts pressure on the body and requires more space, is the only option for a 45kg male doll that can't stand. Storing upright becomes possible for male dolls with standing feet, a real advantage if you don't have a lot of room.

Noticeable Hardness at the Bottom
Worth a final note is the aesthetic difference between standing and non-standing feet. Slightly harder at the bottom is how standing feet are, because of the bolts, and it can be apparent when the doll is barefoot. Less aesthetically gratifying, to some purchasers, is this, especially on dolls with delicate features, as the hard soles look marginally industrial. Softer and more natural-looking, non-standing feet are preferred by some purchasers. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.

A Bolt That Falls Out Can Make the Doll Collapse
One more angle worth considering: maintenance. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out entirely the doll can collapse. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. In the long run non-standing feet are marginally lower-maintenance, since there's no hardware to come loose and so no such issue.

Silky Floors Need Extra Support
On distinct surfaces, the bolts influence how the doll stands. Grip is great on carpet, and the doll is constant. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, particularly if the floor is smooth. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

If You Care About Exact Proportions
There's a final consideration that's frequently overlooked, which is how standing feet impact the doll's overall proportions. A small amount of length is added to the foot by the bolts, which can somewhat change the way the doll looks in barefoot photos. Generally invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Marginally shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Additional Cost for Extra Options
Standing feet are worth the extra cost for most buyers, which is the bottom line, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Skipping them is for customers certain that bed use is all the doll will get, with no standing display or photography. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out look at this for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]