[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Standing feet are the sort of feature people ignore until they need them; after that, they find the difference enormous. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. Knowing the difference before you order is among the simplest ways to dodge a frustrating purchase.

The Difference Explained Simply
It's a simple difference, at its most basic. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

Why Photographers Specify Standing Feet
For photography and display, standing feet are necessary. A doll who can stand unaided can be photographed in full-length poses without visible supports and displayed in a corner, a doorway, or wherever else she needs to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the main reason most photographers specify standing feet when ordering.

Showering and Standing Feet
Shower use makes standing feet critical too. It's impractical and unsafe to lie her down in a shower, which is why a doll for showering with needs to be able to stand. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
The shower use point needs expanding, since so many damaged dolls are down to it. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's essentially unfixable. Nevertheless attentive you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Evident and Accessible Storage
In some setups, a doll with standing feet is also easier to store. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. This works as a space-efficient alternative when there's no room for a hanging setup, and it's a good choice if you want to display the doll rather than keep her hidden. Evident and accessible storage is made possible by the standing feet, which some customers prefer.

What Standing Feet Cost
A little more pricey and somewhat heavier: that's the disadvantage of standing feet. The metal bolts add a small quantity of weight to the doll, and the manufacturing process is more involved, so the cost is generally a few percent higher than a doll with non-standing feet. Buying on a very tight budget? The difference is small and usually worth the additional cost, but it's worth knowing about.

Distracting in Photos
The second disadvantage is that bare feet can show the bolts. With high-heeled shoes or open-toed footwear, the bolts might be visible in photos, something some purchasers find distracting. Because this slight aesthetic issue can be solved by covering the feet with closed shoes or opting for footwear that conceals the bolts, it's not a reason to stay away from standing feet totally.

The Case for Non-Standing Feet
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. A doll that lives chiefly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Nothing incorrect with this choice for customers who know what they want; it's entirely valid.

The Tactile Side of Non-Standing Feet
Some purchasers find non-standing feet more comfortable to touch, being slightly softer and more pliable. You won't usually pick on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Non-standing feet carry a large risk, which is customers forgetting what kind of feet they have and attempting to stand the doll regardless. It's a typical slip-up with real consequences, since the foam inside the ankle can't support the doll's weight and will tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.

The Short Answer Is No
And what about retrofitting standing feet to a doll that doesn't have them? The short answer is that it can't readily be done. The original bolts are embedded in the soles during manufacturing, and an after that addition requires cutting into the feet and installing new hardware, which is expensive and often not as solid. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than attempting to add them later.

If You're Not Sure, Choose Standing
When opting for between standing and non-standing feet, the sensible advice is uncomplicated. For photographing the doll, displaying her standing, or employing her in the shower, you need standing feet. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly acceptable. The safer opt for when you're undecided is standing feet; they limit nothing, and the small additional cost is worth it.

Room for Storage Is a Real Concern
A gender consideration is also worth mentioning. Male dolls tend to benefit more than female dolls from standing feet, as they're heavier and more tough to store in any other way. There's no choice but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and needs more space. Male dolls can store upright with standing feet, which is a real benefit for buyers who don't have a lot of room.

Barefoot Photography Priorities
Worth a final note is the aesthetic difference between standing and non-standing feet. The bolts make standing feet slightly harder at the bottom, and this can be visible when the doll is barefoot. Less aesthetically gratifying, to some buyers, is this, especially on dolls with delicate features, as the hard soles look somewhat industrial. Some purchasers prefer the softer, more natural look of non-standing feet. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
Worth considering, too, is a maintenance angle. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. There's no hardware to come loose with non-standing feet, so they don't have this issue and are slightly lower-maintenance in the long run.

How the Bolts Behave on Different Surfaces
The bolts impact how the doll stands on different surfaces as well. Grip is solid on carpet, and the doll is stable. Hard flooring can make the bolts slip, especially if the floor is silky, so the doll may need additional support to stay upright. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

A Subtle Effect on Appearance
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. Slightly changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. If you care about specific proportions and plan to photograph the doll barefoot, this subtle effect, normally invisible in shoes, is worth knowing about. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are a little shorter and more natural-looking.

Who Should Skip Standing Feet
The bottom line is that standing feet are worth the additional cost for most buyers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. Who can skip them? Buyers who are certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out go now as well as find here and click this over here now for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]