[FrankJScott]

[center][/center]

[center][size=large]VIEW BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Until the moment they need them, purchasers don't think about standing feet; then they find out the difference is gigantic. Small detail on the spec sheet, large outcomes: what the doll can do, how she stores, how she photographs and how she wears over time all change. Before you order, understand the difference, which is one of the simplest ways to steer clear of an irritating purchase.

The Difference Explained Simply
The basic difference is simple. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

Upright Without Props
When it comes to photography and display, standing feet are essential. With a doll that can stand unaided you get full-length poses without noticeable supports and display in a corner, a doorway, or anywhere else that needs her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the chief reason most photographers specify standing feet when ordering.

A Real Safety Consideration
If you want shower use, standing feet are essential as well. It's impractical and unsafe to lie her down in a shower, which is why a doll for showering with needs to be able to stand. A wet environment is no issue for stability with standing feet, and the metal bolts make sure the feet don't absorb water the way non-standing feet would. The real safety consideration is that water absorption in non-standing feet can lead to rust and eventual structural failure.

Why Shower Use Destroys So Many Dolls
Let's expand on shower use, because a lot of damaged dolls start there. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes apparent, and it's basically unfixable once it starts. Irrespective of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower nevertheless careful you are.

Space-Efficient Storage
Another upside of standing feet is easier storage in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. A great alternative for customers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Storing the doll in a way that's visible and accessible is possible with standing feet, and some customers prefer that.

Is the Premium Worth Paying?
Standing feet cost a little more and weigh somewhat more, and that's the drawback. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the cost is normally a few percent higher than a doll with non-standing feet. Buying on an extremely tight budget? The difference is small and ordinarily worth the additional cost, but it's worth knowing about.

Selecting Footwear That Conceals Them
A further disadvantage is the bolts becoming noticeable if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, which some customers find distracting. This minor aesthetic issue is easily solved by covering the feet with closed shoes or by choosing footwear that hides the bolts; it's no reason to steer clear of standing feet entirely.

Perfectly Adequate for Many Buyers
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly enough, and the savings can go on upgrades such as articulated hands or a better wig. For buyers who know what they want, this is a totally valid choice.

Comfortable to Touch
The softer, more flexible feel of non-standing feet, small as it is, is more comfortable to touch for some purchasers. Not ordinarily enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Attempting to Stand the Doll Anyway
The sizable risk with non-standing feet is that customers forget what kind of feet they have and try to stand the doll in any case. This usual oversight causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Don't be tempted to test their limits if you're buying non-standing feet; remember that they're non-standing.

Adding Bolts Afterwards
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. The short answer is a no, not readily. During manufacturing the bolts are embedded in the soles; doing it afterwards means cutting into the feet and installing new hardware, which is expensive and often doesn't work as well as the original. You might want them later if you're considering purchasing a doll without standing feet; in that case, it's better to purchase a doll with standing feet in the first place than to attempt to add them later.

Standing Feet Don't Limit What You Can Do
For customers who are opting for between standing and non-standing feet, the sensible advice is simple. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly enough. Unsure which to select? The small extra cost of standing feet acquires you the safer option, with no limit on what the doll can do.

Weight and Storage Together
Another consideration worth mentioning concerns gender. Broadly, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more tough to store in any other way. Storage lying down, which puts pressure on the body and needs more space, is the only alternative for a 45kg male doll that can't stand. Storing upright becomes possible for male dolls with standing feet, a real benefit if you don't have a lot of room.

Industrial-Looking Soles on Delicate Dolls
A last word on the aesthetic difference between standing and non-standing feet is rewarding. When the doll is barefoot, the small hardness at the bottom of standing feet, caused by the bolts, can be evident. On dolls with delicate features in particular, some buyers find this less aesthetically pleasing, as the hard soles look marginally industrial. The softer and more natural look of non-standing feet is what some customers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

Tighten With the Appropriate Tool
A maintenance angle deserves consideration too. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out entirely can cause the doll to collapse. Check every few months, by gently twisting the bolts, and tighten with the fitting tool whichever feel loose. In the long run non-standing feet are a little lower-maintenance, since there's no hardware to come loose and so no such issue.

Hard Flooring Can Be Slippery
Standing on different surfaces is also impacted by the bolts. The doll is stable on carpet, where the bolts grip well. If the floor is hard, and particularly smooth, the bolts can slip and the doll may need additional support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it stops sliding. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.

More Natural-Looking Without the Bolts
A final consideration is frequently overlooked: how standing feet impact the doll's overall proportions. The bolts add a small quantity of length to the foot, which can marginally change the way the doll looks in barefoot photos. If you care about exact proportions and plan to photograph the doll barefoot, this subtle effect, usually invisible in shoes, is worth knowing about. Marginally shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

The Better Choice for Everyone Else
At the end of the day, standing feet are worth the extra cost for most purchasers, as they open up options for posing, display, storage and the shower that non-standing feet don't. The only purchasers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out his explanation for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]