[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET ADVICE HERE[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Standing feet are one of those features that buyers don't think about until they need them, and then they discover the difference is gigantic. Small detail on the spec sheet, big results: what the doll can do, how she stores, how she photographs and how she wears over time all change. Before you order, comprehend the difference, which is one of the simplest ways to stay away from an annoying purchase.

Bolts or No Bolts
The difference comes down to something uncomplicated. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. Without these bolts, non-standing feet limit the doll to sitting or lying down, and attempting to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

A Wider Range of Poses and Settings
Standing feet are what photography and display depend on. Full-length poses without evident supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the main reason most photographers specify them when ordering.

Why Showers Demand Standing Feet
Standing feet are also crucial for shower use. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. Stability in a wet environment comes from the standing feet, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Real safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Foam or Filler Inside the Ankle
Expanding on the shower use point is valuable; it's the source of a lot of damaged dolls. Non-standing feet contain foam or filler material inside the ankle, and wet conditions make that material absorb water. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become apparent and being essentially unfixable once it starts. No matter how attentive you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.

Standing Storage Explained
Standing feet can make storage easier as well, depending on the setup. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. A good alternative for purchasers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Standing feet make apparent and accessible storage possible, which suits some buyers best.

Is the Premium Worth Paying?
The drawback of standing feet is that they're a little more costly and somewhat heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small amount of weight and manufacturing is more involved. The difference is small, typically worth the extra cost, and worth knowing about if you're acquiring on an extremely tight budget.

Distracting in Photos
The second downside is that bare feet can show the bolts. High-heeled shoes or open-toed footwear on a doll can leave the bolts apparent in photos, which some purchasers find distracting. No reason to steer clear of standing feet entirely, since this trivial aesthetic issue can be solved with closed shoes or footwear that hides the bolts.

Know What You Want
Purchasers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. For a doll that's going to spend most of her life in a bed or on a sofa, non-standing feet are perfectly adequate, and the savings can go towards other upgrades like articulated hands or a better wig. This is a totally valid choice for customers who know what they want.

Softness as a Selling Point
More comfortable to touch, for some customers, are non-standing feet, which are marginally softer and more pliable. On its own this subtle difference doesn't usually justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Forgetting what kind of feet they have, purchasers try to stand the doll in any case, and that's the sizable risk with non-standing feet. This typical error causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. If non-standing feet are what you're acquiring, remember that they're non-standing and don't test their limits.

Bolts Are Embedded During Manufacturing
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not easily, no. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is expensive and regularly doesn't work as well as the original. Acquire a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Bed or Sofa Only: Non-Standing Is Fine
The practical advice on choosing between standing and non-standing feet is straightforward. You'll need standing feet for photographing the doll, displaying her standing, or utilising her in the shower. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly sufficient. For the unsure, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Male Dolls Benefit More From Standing Feet
There's also a gender consideration worth mentioning. Heavier, and more hard to store in any other way, male dolls broadly benefit from standing feet more than female dolls. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. The ability to store upright is given to male dolls by standing feet, and that's a real advantage for customers who don't have a lot of room.

The Aesthetic Difference
One final note: the aesthetic difference between standing and non-standing feet. Evident when the doll is barefoot can be the minor hardness at the bottom of standing feet, which the bolts cause. Some buyers consider it less aesthetically satisfying, particularly with fragile features, because of the marginally industrial look of the hard soles. The softer and more natural look of non-standing feet is what some buyers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

No Hardware to Come Loose
A maintenance angle deserves consideration too. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out totally can cause the doll to collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the fitting tool. In the long run non-standing feet are slightly lower-maintenance, since there's no hardware to come loose and so no such issue.

A Small Mat or Grippy Pad
The bolts impact how the doll stands on different surfaces as well. Carpet suits the bolts, which grip well, leaving the doll stable. Hard flooring can make the bolts slip, particularly if the floor is smooth, so the doll may need additional support to stay upright. On a hard surface, consider employing a small mat or a grippy pad under the feet to avoid sliding. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

How Standing Feet Change the Look
There's one more consideration that's frequently overlooked: standing feet influence the doll's overall proportions. Barefoot photos can look slightly distinct because the bolts add a small quantity of length to the foot. Usually invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. Somewhat shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Bed-Only Dolls Don't Need Them
The bottom line is that standing feet are worth the additional cost for most purchasers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out click here on top of pop over to this website which is worth considering with address bearing in mind news on top of more information as well as like it as well as look what i found alongside all see here together with find out here and click here to investigate for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]