[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR BEST SEX DOLL FEET GUIDE TODAY[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Few buyers think about standing feet beforehand, yet the difference, once they need them, is vast. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. Grasp the difference before ordering and you'll have avoided an irritating purchase in one of the simplest ways possible.

Standing Upright Without Support
It's an uncomplicated difference, at its most basic. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Are the bolts there or not? That's the key, and everything else follows from it.

Full-Length Poses Without Visible Supports
Photography and display both need standing feet. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. That's the chief reason most photographers specify standing feet when ordering: it opens up a wide range of poses and settings that non-standing feet can't manage.

Metal Bolts Keep Water Out of the Feet
Standing feet are also crucial for shower use. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as hazardous. A wet environment is no problem for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Real safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become apparent but is basically unfixable once it starts. However cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.

No Hanging Hook or Storage Case Needed
Easier storage is another thing standing feet offer in some setups. No hanging hook or storage case is needed to store a doll with standing feet upright in a corner, a wardrobe, or a storage cabinet. This works as a space-efficient alternative when there's no room for a hanging setup, and it's a good alternative if you want to display the doll rather than keep her hidden. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some purchasers prefer that.

Metal Bolts Add Weight
Their downside is merely being marginally more costly and a little heavier. The metal bolts add a small quantity of weight to the doll, and the manufacturing process is more involved, so the price is usually a few percent higher than a doll with non-standing feet. For purchasers on an extremely tight budget it's worth knowing about, even though the difference is small and it's ordinarily worth the extra cost.

Selecting Footwear That Conceals Them
If the feet are bare, the bolts can become visible; that's the other drawback. High-heeled shoes or open-toed footwear on a doll can leave the bolts apparent in photos, which some customers find distracting. Because this trivial aesthetic issue can be solved by covering the feet with closed shoes or choosing footwear that conceals the bolts, it's not a reason to stay away from standing feet entirely.

Fine for Bed-Only Dolls
Non-standing feet cost less and weigh less, and they suit purchasers who only want to use the doll in bed and won't display her standing or shower with her. A doll that lives mainly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Where purchasers know what they want, this is a completely valid choice.

Comfortable to Touch
Non-standing feet are also slightly softer and more flexible, which some buyers find more comfortable to touch. Subtle as it is, and not typically enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Remember They're Non-Standing
It's the forgetful customer who trips up on non-standing feet, attempting to stand the doll in any case; that's the sizable risk. Expect genuine damage from this common error, because the foam inside the ankle can't support the doll's weight and will tear or collapse. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. Purchasing non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.

Decide Before You Order
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. Not readily; that's the short answer. Manufacturing is when the bolts get embedded in the soles; after that, you'd have to cut into the feet and install new hardware, which is costly and regularly doesn't work as well as the original. Acquire a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

A Simple Decision Guide
The practical advice for purchasers selecting between standing and non-standing feet is uncomplicated. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly enough. Unsure which to opt for? The small extra cost of standing feet buys you the safer option, with no limit on what the doll can do.

Upright Storage for Male Dolls
It's worth mentioning a gender consideration too. Normally, standing feet benefit male dolls more than female dolls, because male dolls are heavier and more difficult to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. It's a genuine advantage for customers who don't have a lot of room that standing feet let male dolls store upright.

Harder Soles Because of the Bolts
A last word on the aesthetic difference between standing and non-standing feet is valuable. Because of the bolts, standing feet are somewhat harder at the bottom, which can be apparent when the doll is barefoot. Particularly on dolls with delicate features, some purchasers find the a little industrial look of the hard soles less aesthetically pleasing. The softer and more natural look of non-standing feet is what some customers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

A Loose Bolt Can Damage the Foot or Ankle
Maintenance is another angle that's worth considering. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the suitable tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them a little lower-maintenance in the long run.

A Small Mat or Grippy Pad
How the doll stands on different surfaces is also impacted by the bolts. Carpet is where the bolts grip well and the doll is steady. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a silky floor. Putting a small mat or a grippy pad under the feet is worth considering on a hard surface, as it prevents sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

How Standing Feet Change the Look
Regularly overlooked, there's a final consideration in how standing feet impact the doll's overall proportions. Because the bolts add a small quantity of length to the foot, the doll can look a little distinct in barefoot photos. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

Who Should Skip Standing Feet
Options for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the extra cost for most purchasers. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should choose standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out bonuses together with best site as well as the original source on top of more about the author bearing in mind see here as well as informative post and don't forget look here together with original site not forgetting sites such as clicking here and original site for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]