[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR BEST SEX DOLL FEET ADVICE NOW[/size][/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
You won't think about standing feet until you need them, and then you'll find the difference is vast. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards steering clear of an irritating purchase.

The Bolts Are the Key
The basic difference is straightforward. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

Corners, Doorways and Anywhere Upright
Necessary for photography and display: standing feet. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the chief reason most photographers specify standing feet when ordering.

Lying Her Down in a Shower Is Impractical and Dangerous
Showering is another case where standing feet are crucial. Lying her down in a shower is impractical and dangerous, so showering with your doll means she needs to stand. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

The Source of a Lot of Damaged Dolls
Expanding on the shower use point is rewarding; it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Water rusting the metal skeleton inside the leg takes weeks or months to become visible, yet once it starts it's essentially unfixable. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how attentive you are.

Space-Efficient Storage
Another upside of standing feet is easier storage in some setups. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Purchasers who want to display the doll rather than keep her hidden will find this a great choice, and it's space-efficient if you don't have room for a hanging setup. Some customers prefer that the standing feet make it possible to store the doll in a way that's visible and accessible.

The Extra Cost Explained
Their disadvantage is merely being slightly more pricey and somewhat heavier. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a price that's ordinarily a few percent higher than a doll with non-standing feet. If you're acquiring on an extremely tight budget, know that the difference is small and it's typically worth the extra cost.

Solving the Visible Bolt Problem
Bare feet can make the bolts noticeable, which is the other downside. The bolts might be apparent in photos on a doll with high-heeled shoes or open-toed footwear, and some customers find that distracting. No reason to steer clear of standing feet entirely, since this trivial aesthetic issue can be solved with closed shoes or footwear that hides the bolts.

When Standing Feet Aren't Needed
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Non-standing feet are perfectly enough if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. It's an entirely valid choice if you know what you want.

Softer, More Flexible Feet
Non-standing feet are also somewhat softer and more flexible, which some purchasers find more comfortable to touch. Specifically looking for maximum softness? Then this subtle difference, though not ordinarily enough to justify the choice on its own, is worth knowing about. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Remember They're Non-Standing
Attempting to stand the doll regardless, after forgetting what kind of feet they have, is the sizable risk customers run with non-standing feet. Expect real damage from this typical oversight, because the foam inside the ankle can't support the doll's weight and will tear or collapse. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're buying them.

Why Retrofitting Doesn't Work Well
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. The short answer is no, not easily. The original bolts are embedded in the soles during manufacturing, and a subsequently addition requires cutting into the feet and installing new hardware, which is costly and often not as great. Purchase a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.

A Simple Decision Guide
When choosing between standing and non-standing feet, the useful advice is straightforward. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly sufficient. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

A Gender Consideration
We should mention a gender consideration as well. Heavier, and more hard to store in any other way, male dolls broadly benefit from standing feet more than female dolls. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. It's a genuine advantage for buyers who don't have a lot of room that standing feet let male dolls store upright.

Industrial-Looking Soles on Delicate Dolls
A last word on the aesthetic difference between standing and non-standing feet is valuable. The bottom of standing feet is a little harder because of the bolts, something that can be apparent when the doll is barefoot. Dolls with fragile features particularly suffer, some customers feel, because the hard soles look a little industrial and less aesthetically gratifying. Softer and more natural-looking, non-standing feet are preferred by some customers. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
One more angle worth considering: maintenance. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Every few months, check the bolts by gently twisting them, and tighten them with the fitting tool if they feel loose. No hardware means nothing to come loose, so non-standing feet don't have this issue and are slightly lower-maintenance in the long run.

Stability Depends on the Surface
How the doll stands on distinct surfaces is also impacted by the bolts. Carpet is where the bolts grip well and the doll is constant. The doll may need additional support to stay upright when the bolts slip on hard flooring, especially a smooth floor. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it avoids sliding. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

A Subtle Effect on Appearance
There's a final consideration that's frequently overlooked, which is how standing feet impact the doll's overall proportions. Because the bolts add a small quantity of length to the foot, the doll can look marginally distinct in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about exact proportions. Somewhat shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

Select Standing Unless You're Certain
Most buyers should find standing feet worth the extra cost; they open up posing, display, storage, and shower choices that non-standing feet don't. That's the bottom line. Who can skip them? Purchasers who are certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out original site not forgetting sites such as more info not forgetting sites such as click this link now which is worth considering with visit your url bearing in mind discover this and don't forget click here as well as read the full info here together with her comment is here not to mention redirected here and additional info for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]