[FrankJScott]

[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Until the moment they need them, purchasers don't think about standing feet; then they find out the difference is huge. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards evading an annoying purchase.

Bolts or No Bolts
The core difference is a simple one. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. No bolts in non-standing feet means the doll can only sit or lie down, and trying to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

Corners, Doorways and Anywhere Upright
Necessary for photography and display: standing feet. Standing unaided, she can be photographed in full-length poses without noticeable supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
Showering is another case where standing feet are crucial. Standing is the only sensible way to shower with your doll, because lying her down in a shower is impractical and dangerous. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Weeks or Months Before the Damage Shows
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's fundamentally unfixable once it starts. Because the water will find its way in anyway of your precautions, a doll with non-standing feet should never be in the shower, no matter how diligent you are.

Noticeable and Accessible Storage
Another advantage of standing feet is easier storage in some setups. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Purchasers who don't have room for a hanging setup will find this a space-efficient choice, and it suits buyers who want to display the doll rather than keep her hidden. Standing feet allow storage that's apparent and accessible, something some customers prefer.

A More Involved Manufacturing Process
Marginally more pricey and marginally heavier: that's the disadvantage of standing feet. Few percent higher is the usual cost versus a doll with non-standing feet, with the metal bolts adding a small amount of weight and the manufacturing process being more involved. If you're purchasing on a very tight budget, know that the difference is small and it's typically worth the additional cost.

A Minor Aesthetic Issue
The other disadvantage is that the bolts can become evident if the feet are bare. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some customers find distracting. Cover the feet with closed shoes or choose footwear that conceals the bolts and this slight aesthetic issue is solved, so it's not a reason to stay away from standing feet totally.

Perfectly Adequate for Many Buyers
Non-standing feet are cheaper and lighter, and they're fine for buyers who only want to use the doll in bed and don't plan to display her standing or shower with her. A doll that lives mostly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Entirely valid is this choice for buyers who know what they want.

Softer, More Flexible Feet
There's a slight softness and flexibility to non-standing feet that some buyers find more comfortable to touch. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not usually enough to justify the choice on its own. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

Forgetting What Kind of Feet She Has
The sizable risk with non-standing feet is that buyers forget what kind of feet they have and attempt to stand the doll in any case. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a typical error. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.

Can Standing Feet Be Retrofitted?
Then there's the question of whether standing feet can be retrofitted to a doll without them. In short, no, not readily. Manufacturing is when the bolts get embedded in the soles; afterwards, you'd have to cut into the feet and install new hardware, which is pricey and frequently doesn't work as well as the original. It's better to acquire a doll with standing feet in the first place than to attempt to add them later if you're considering buying a doll without standing feet and think you might want them later.

Standing Feet Don't Limit What You Can Do
Direct is the functional advice for customers picking between standing and non-standing feet. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly enough. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

Pressure on the Body When Lying Down
Another consideration worth mentioning concerns gender. More than female dolls, male dolls generally advantage from standing feet, being heavier and more tough to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a genuine upside.

The Aesthetic Difference
To finish, the aesthetic difference between standing and non-standing feet is worth noting. Standing feet have an a little harder bottom because of the bolts, and this can be noticeable with the doll barefoot. Dolls with fragile features notably suffer, some buyers feel, because the hard soles look a little industrial and less aesthetically pleasing. More natural-looking and softer are non-standing feet, which some purchasers prefer. Barefoot photos being a priority makes this trade-off worth factoring into your decision, since it only matters if you're photographing the doll barefoot.

No Hardware to Come Loose
Another angle worth considering is maintenance. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out totally and the doll collapsing, with a loose one damaging the foot or ankle on the way there. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the appropriate tool. With no hardware to come loose, non-standing feet avoid this issue and are a little lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
How well the doll stands on distinct surfaces depends in part on the bolts. Carpet suits the bolts, which grip well, leaving the doll constant. Hard flooring can make the bolts slip, especially if the floor is silky, so the doll may need additional support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

If You Care About Exact Proportions
A final, often overlooked, consideration is the effect of standing feet on the doll's overall proportions. Because the bolts add a small amount of length to the foot, the doll can look a little distinct in barefoot photos. Subtle as the effect is, and usually invisible in shoes, it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. With non-standing feet there are no bolts, so no such effect, and the feet are marginally shorter and more natural-looking.

Posing, Display, Storage and Shower Options
At the end of the day, standing feet are worth the additional cost for most purchasers, as they open up options for posing, display, storage and the shower that non-standing feet don't. The only customers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this Your Ultimate Guide to Sex Dolls Right Now- The Honest Breakdown 0b3ee0c together with Your Ultimate Deep Dive Into Modern Sex Dolls- The Truth and The Complete Word on Sex Dolls Today- The Truth. Also check out click site as well as look at this now and more information for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]