[FrankJScott]

[center][/center]

[center][size=large]CLICK FOR THE BEST SEX DOLL FEET GUIDE NOW[/size][/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
It's only when purchasers need standing feet that they notice them, and the difference is gigantic. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. An irritating purchase can be avoided in one of the simplest ways: understand the difference before you order.

The Difference Explained Simply
The basic difference is simple. The doll can stand upright without support because standing feet have metal bolts embedded in the soles. No bolts in non-standing feet means the doll can only sit or lie down, and trying to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

Corners, Doorways and Anywhere Upright
For photography and display, standing feet are crucial. A doll that stands unaided can be photographed full-length with no noticeable supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the primary reason most photographers specify them when ordering.

Water Absorption Leads to Rust
Shower use is another thing for which standing feet are necessary. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and dangerous. Metal bolts ensure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Never Shower a Non-Standing Doll
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Water rusting the metal skeleton inside the leg takes weeks or months to become apparent, yet once it starts it's basically unfixable. Showers and non-standing feet don't mix, no matter how cautious you are, as the water will find its way in regardless of your precautions.

Visible and Accessible Storage
There's also easier storage with standing feet in some setups. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. This is a space-efficient choice for customers who don't have room for a hanging setup, and it's a solid alternative for customers who want to display the doll rather than keep her hidden. Storing the doll in a way that's noticeable and accessible is possible with standing feet, and some buyers prefer that.

Very Tight Budgets and Standing Feet
Standing feet cost a little more and weigh a little more, and that's the disadvantage. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the cost usually ends up a few percent higher than a doll with non-standing feet. Small as the difference is, and ordinarily worth the additional cost, it's worth knowing about if you're buying on a really tight budget.

A Minor Aesthetic Issue
If the feet are bare, the bolts can become visible; that's the other downside. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some customers find distracting. The minor aesthetic issue goes away with closed shoes or footwear that conceals the bolts, which means it's not a reason to stay away from standing feet totally.

Non-Standing Feet: Cheaper and Lighter
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly adequate for a doll who largely lives in a bed or on a sofa. Nothing mistaken with this choice for purchasers who know what they want; it's entirely valid.

Not Enough to Decide on Its Own
There's a slight softness and flexibility to non-standing feet that some purchasers find more comfortable to touch. Subtle as it is, and not typically enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Remember They're Non-Standing
The big risk with non-standing feet: customers forget what kind of feet they have and attempt to stand the doll in any case. This usual mistake causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. If non-standing feet are what you're buying, remember that they're non-standing and don't test their limits.

Bolts Are Embedded During Manufacturing
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. To put it briefly, not readily, no. Because the bolts are embedded in the soles during manufacturing, adding them later means cutting into the feet and installing new hardware, an expensive process that regularly doesn't work as well as the original. You might want them later if you're considering buying a doll without standing feet; in that case, it's better to purchase a doll with standing feet in the first place than to attempt to add them later.

The Safer Option
Opting for between standing and non-standing feet? The functional advice is direct. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. Perfectly acceptable are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. Unsure which to select? The small extra cost of standing feet acquires you the safer choice, with no limit on what the doll can do.

A Gender Consideration
One more thing worth mentioning: a gender consideration. Male dolls tend to upside more than female dolls from standing feet, as they're heavier and more difficult to store in any other way. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. With standing feet, male dolls can be stored upright, a genuine benefit for buyers who don't have a lot of room.

A Final Note on Appearance
A final note is worth making on the aesthetic difference between standing and non-standing feet. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be apparent. Some purchasers don't find this aesthetically satisfying, particularly on dolls with fragile features, since the hard soles look somewhat industrial. Preferred by some buyers, non-standing feet are softer and more natural-looking. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Tighten With the Appropriate Tool
One more angle worth considering: maintenance. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the appropriate tool. There's no hardware to come loose with non-standing feet, so they don't have this issue and are slightly lower-maintenance in the long run.

Silky Floors Need Extra Support
Distinct surfaces change how the doll stands, thanks to the bolts. Carpet is where the bolts grip well and the doll is stable. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

How Standing Feet Change the Look
A final consideration is often overlooked: how standing feet affect the doll's overall proportions. Adding a small amount of length to the foot, the bolts can marginally change the way the doll looks in barefoot photos. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Without the bolts, non-standing feet don't have this effect, and the feet are slightly shorter and more natural-looking.

The Better Choice for Everyone Else
What it comes down to is that most customers will find standing feet worth the extra cost, since they open up posing, display, storage, and shower choices that non-standing feet don't. The exception is the buyer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this rosslink. Also check out read this post here for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]