[FrankJScott]

[center][/center]

[center][size=large]SEE THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is gigantic. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. A frustrating purchase can be avoided in one of the simplest ways: grasp the difference before you order.

Bolts or No Bolts
There's a simple basic difference. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. Whether the bolts are present decides everything else; they're the key.

Why Photographers Specify Standing Feet
When it comes to photography and display, standing feet are important. If a doll can stand unaided, full-length poses without noticeable supports are possible, as is display in a corner, a doorway or anywhere else that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Why Showers Demand Standing Feet
For shower use too, standing feet are necessary. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and risky. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become apparent but is basically unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how diligent you are.

Visible and Accessible Storage
Standing feet bring easier storage, too, in some setups. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a solid one. Some buyers prefer the apparent, accessible storage that the standing feet make possible.

The Extra Cost Explained
It's a disadvantage that standing feet are a little more expensive and somewhat heavier. Somewhat more weight comes from the metal bolts, and the more involved manufacturing process pushes the price usually a few percent above a doll with non-standing feet. Small as the difference is, and ordinarily worth the additional cost, it's worth knowing about if you're buying on a really tight budget.

Bolts Showing When the Feet Are Bare
The bolts can show if the feet are bare, which is the other disadvantage. Distracting to some customers is the possibility that the bolts are visible in photos on a doll with high-heeled shoes or open-toed footwear. You can solve this minor aesthetic issue by covering the feet with closed shoes or picking footwear that hides the bolts, so don't steer clear of standing feet completely because of it.

Fine for Bed-Only Dolls
They're cheaper and lighter, and non-standing feet are fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly adequate when the doll will largely be in a bed or on a sofa. Nothing wrong with this choice for buyers who know what they want; it's totally valid.

The Tactile Side of Non-Standing Feet
There's a slight softness and flexibility to non-standing feet that some purchasers find more comfortable to touch. On its own this subtle difference doesn't generally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

A Common and Costly Mistake
Forgetting what kind of feet they have, buyers attempt to stand the doll regardless, and that's the big risk with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a typical slip-up. A doll that can no longer stand, even if you try to support her, is the result, because the feet have been permanently damaged. When you purchase non-standing feet, remember what they are and don't be tempted to test their limits.

New Hardware Rarely Works as Well
A further question is whether a doll that doesn't have standing feet can have them retrofitted. Not readily; that's the short answer. The original bolts are embedded in the soles during manufacturing, and an afterwards addition requires cutting into the feet and installing new hardware, which is costly and frequently not as solid. If you might want standing feet later, and you're considering a doll without them, acquiring a doll with standing feet in the first place beats attempting to add them later.

Worth the Small Extra Cost
Deciding between standing and non-standing feet comes with uncomplicated sensible advice. Photographing the doll, displaying her standing, or utilising her in the shower? Then you need standing feet. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. The safer select when you're undecided is standing feet; they limit nothing, and the small extra cost is worth it.

Room for Storage Is a Real Concern
Another consideration worth mentioning concerns gender. More than female dolls, male dolls typically advantage from standing feet, being heavier and more tough to store in any other way. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. With standing feet, male dolls can be stored upright, a real benefit for purchasers who don't have a lot of room.

The Aesthetic Difference
A final note is worth making on the aesthetic difference between standing and non-standing feet. The bolts make standing feet a little harder at the bottom, and this can be noticeable when the doll is barefoot. Hard soles look slightly industrial, which some customers find less aesthetically pleasing, particularly on dolls with fragile features. Preferred by some customers, non-standing feet are softer and more natural-looking. This is a trade-off that only matters if you're photographing the doll barefoot, and it's worth factoring into your decision if barefoot photos are a priority.

A Bolt That Falls Out Can Make the Doll Collapse
Consider the maintenance angle too. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. Use the suitable tool to tighten any bolts that feel loose when you check them by gently twisting them every few months. Over the long run, non-standing feet need marginally less maintenance, because they don't have hardware that can come loose.

Avoiding Sliding
Distinct surfaces change how the doll stands, thanks to the bolts. With carpet, the bolts grip well and the doll is steady. Slipping bolts on hard flooring, particularly if the floor is smooth, can mean the doll needs additional support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

Barefoot Photos and Exact Proportions
A final consideration is often overlooked: how standing feet impact the doll's overall proportions. A little changing the way the doll looks in barefoot photos is a possible effect of the small amount of length the bolts add to the foot. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are marginally shorter and more natural-looking.

Bed-Only Dolls Don't Need Them
At the end of the day, standing feet are worth the extra cost for most buyers, as they open up options for posing, display, storage and the shower that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this The Complete Look at Sex Dolls Right Now- No Hype Just Facts e0ce284 which is worth considering with Your Ultimate Deep Dive Into Sex Dolls- The Truth and A Straight-Up Primer on Sex Dolls- The Real Talk. Also check out my company for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]